STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity


     The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ST Zio connector, which is an extension of Arduino™ Uno V3, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, , as well as a direct access to the ARM®mbed™online resources.


Microcontroller features

  • STM32F429ZIT6 in LQFP144 package
  • ARM®32-bit Cortex®-M4 CPU with FPU
  • 180 MHz max CPU frequency
  • VDD from 1.8 V to 3.6 V
  • 2048 KB Flash
  • 256+4 KB SRAM, including 64 KB of CCM (core couple memory) data RAM
  • GPIOs (114) with external interrupt capability
  • 16-stream DMA controller with FIFOs and burst support
  • 12-bit ADCs with 24 channels (3)
  • 12-bit DAC channels (2)
  • USART/UART (4)
  • I2C (3)
  • SPI (6)
  • Advanced-control Timer (2)
  • General Purpose Timers (10)
  • Watchdog Timers (2)
  • CAN 2.0B active (2)
  • SAI
  • SDIO
  • Random Generator (TRNG for HW entropy)
  • USB 2.0 OTG HS
  • USB 2.0 OTG FS
  • Camera interface
  • Ethernet


Nucleo features

  • Two types of extension resources
    • Arduino Uno Revision 3 connectivity
    • STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
  • On-board ST-LINK/V2-1 debugger/programmer with SWD connector
    • Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
  • Flexible board power supply
    • USB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
    • Power management access point
  • Three User LEDs
  • Two push buttons: USER and RESET
  • USB re-enumeration capability: three different interfaces supported on USB
    • Virtual Com port
    • Mass storage (USB Disk drive) for drag'n'drop programming
    • Debug port
  • Ethernet 10/100Mbps


Dikkat = Paket içerisinden mini usb kablo çıkmaz.


Yorum Yap

Lütfen yorum yazmak için oturum açın ya da kayıt olun.


  • Fiyat : 120,00TL
  • KDV Dahil : 141,60TL

Etiketler: NUCLEO-F429ZI, STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino