The 101 has some features in common with both UNO (connectors, available peripherals) and Zero (32bit microcontroller, 3.3V IO) but the low power Intel microcontroller, on-board BLE and motion sensors make it unique.
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks.
The 101 comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins. The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage.
The Arduino 101 (USA only) and the Genuino 101 (outside USA) has been designed in collaboration with Intel®.
|Operating Voltage||3.3V (5V tolerant I/O)|
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||7-17V|
|Digital I/O Pins||14 (of which 4 provide PWM output)|
|PWM Digital I/O Pins||4|
|Analog Input Pins||6|
|DC Current per I/O Pin||20 mA|
|Flash Memory||196 kB|
|Features||Bluetooth LE, 6-axis accelerometer/gyro|
The 101 can be programmed with the Arduino Software (IDE). Select "Arduino/Genuino 101" from the Tools > Board menu. For details, see the reference and tutorials.
The board comes preprogrammed with an RTOS that handles USB connection and allows you to upload new code without the use of an external hardware programmer. It communicates using the DFU protocol (reference).
Paket içeriği :
- 1 Adet Arduino Genuino 101