ULINK 2

 

ULINK 2 (Klon) Arm Jtag Programlayıcı ve Hata Ayıklayıcı (Debugger)

 

     Ulink 2 jtag destekli mcular için programlayıcı ve debugger (hata ayıklayıcı) aracı olarak kullanılır. JTAG, SWD ve OCDS desteği vardır.  Çin üretimi klondur, kapalı poşette gelmektedir.



Features:

  •     Unlimited Breakpoints RAM
  •     Max 2 ROM Breakpoints (ARM7/9)
  •     Max 6 ROM Breakpoints (Cortex-M3)
  •     Execution breakpoints (Set While Executing)
  •     Max 2 (R / W Only, With Value)Access Breakpoints (ARM7 / 9)
  •     Max 4 (With Value) Access Breakpoints (Cortex-M3)
  •     No Trace History
  •     JTAG RTCK support (Return Clock)
  •     28K Memory R / W (Bytes / sec)
  •     25K Flash R / W (Bytes / sec)
  •     50 Single-Step (Fast) (Instructions / sec)
  •     JTAG speed up to 10MHz
  •     Supports various ARM7, ARM9, Cortex-M, 8051, and C166 devices
  •     Serial Wire Debug (SWD)
  •     Serial Wire Viewer (SWV) Data Trace for Cortex-M up to 1Mbit/s (UART mode)
  •     Real-Time Agent with memory R/W during execution, terminal emulation, and serial debug output
  •     Support the program to run during the read-write memory, terminal emulation and serial debug output.
  •     Seamless integration with the Keil µVision IDE & Debugger
  •     Conveniently carried out target hardware on-chip debugging (using on-chip JTAG, SWD, and OCDS), Flash Programming ..
  •     Standard Windows USB driver support Plug and Play ULINK2,
  •     Support for ARM Cortex-M3-based serial wire debug,
  •     Support the program to run during the read-write memory, terminal emulation and serial debug output,
  •     Wide target voltage range: 2.7V - 5.5V
  •     USB powered (No power supply required)
  •     Plug-and-Play installation using standard Windows USB HID drivers
  •     Target Connectors 20-pin (0.10") - ARM Standard JTAG Connector


Supported Device Families

  •         ARM7   
  •         ARM9   
  •         Cortex-M0   
  •         Cortex-M1   
  •         Cortex-M3
  •         XC800 (8051)   
  •         µPSD (8051)   
  •         XC166/XE166/XC2000   
  •         LPC950 (8051)   

 
Paket İçeriği:

  •     1 Adet Ulink2 USB JTAG Adapter
  •     1 Adet 20 Pin JTAG Flat cable
  •     1 Adet USB Cable

 

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi

Doğrulama Kodu

ULINK 2

  • Marka: OEM
  • Ürün Kodu: ULINK2 Programlayıcı
  • Stok Durumu: Stokta var
  • Fiyat : 990,00TL
  • KDV Dahil : 1.188,00TL

Etiketler: ULINK 2, Programmer, Debugger