Pre-Order STM32F103CBT6

 

STM32F103CBT6
 

Mainstream Performance line, ARM Cortex-M3 MCU with 128 Kbytes Flash, 72 MHz CPU, motor control, USB and CAN

 


     The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.

     The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.

Key Features

    ARM®32-bit Cortex®-M3 CPU Core
        72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
        Single-cycle multiplication and hardware division
    Memories
        64 or 128 Kbytes of Flash memory
        20 Kbytes of SRAM
    Clock, reset and supply management
        2.0 to 3.6 V application supply and I/Os
        POR, PDR, and programmable voltage detector (PVD)
        4-to-16 MHz crystal oscillator
        Internal 8 MHz factory-trimmed RC
        Internal 40 kHz RC
        PLL for CPU clock
        32 kHz oscillator for RTC with calibration
    Low-power
        Sleep, Stop and Standby modes
        VBAT supply for RTC and backup registers
    2 x 12-bit, 1 μs A/D converters (up to 16 channels)
        Conversion range: 0 to 3.6 V
        Dual-sample and hold capability
        Temperature sensor
    DMA
        7-channel DMA controller
        Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

    Up to 80 fast I/O ports
        26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
    Debug mode
        Serial wire debug (SWD) & JTAG interfaces
    7 timers
        Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
        16-bit, motor control PWM timer with dead-time generation and emergency stop
        2 watchdog timers (Independent and Window)
        SysTick timer 24-bit downcounter
    Up to 9 communication interfaces
        Up to 2 x I2C interfaces (SMBus/PMBus)
        Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
        Up to 2 SPIs (18 Mbit/s)
        CAN interface (2.0B Active)
        USB 2.0 full-speed interface
    CRC calculation unit, 96-bit unique ID
    Packages are ECOPACK®

 

 

Write a review

Please login or register to review

STM32F103CBT6

  • Fiyat : 17.00TL
  • KDV Dahil : 20.06TL

Tags: STM32F103CBT6